Quality management systems part 2
INDUSTRIAL PHARMACY ll
BP702TT
B.PHARMA SEMESTER 7
jsmasipharmacy.blogspot.com
syllabus
Quality management & Certifications: Concept of Quality, Total Quality Management, Quality by Design (QbD), Six Sigma concept, Out of Specifications (OOS), Change control, Introduction to ISO 9000 series of quality systems standards, ISO 14000, NABL, GLP
5. Out of Specifications (OOS)
Out of specification (OOS): The test results that fall outside the acceptance criteria established
in SOP. (Against Specification limit).
Out of specification (OOS): The test results that fall outside the acceptance criteria established
in SOP. (Against Specification limit).
Out of specification (OOS): The test results that fall outside the acceptance criteria established
in SOP. (Against Specification limit).
When an analytical or test result of any batch or material is out of prescribed and predetermined limits or specifications, it is called as OOS.
OOS may be raised in the case of stability testing, analysis of in-process, test of raw materials, intermediates and finished goods (API). Investigation for OOS may be performed while getting any unacceptable and questionable results.
This investigation is conducted when OOS is found in analysis. In this initial investigation, all the results should be recorded and well documented. The data should be conveyed and forwarded to quality control department, so that full scale analysis can be performed
5.1 Responsibility of Analyst and Supervisor
primary responsibility for the laboratory testing results. He should have sound knowledge about the principle, primary requirements and process of the investigations.if any wrong results are found that should be informed to concern superior department.
Supervisor should overlook the following points:
- Raw data of the result.
- Calculations of the result.
- Proper functioning of instruments.
- Procedure performed by the analyst.
- Quality parameters of solvents, reagents, standard solutions.
- Knowledge of the analyst regarding investigation.
- Method validation and evaluation of performance.
- Preservation of the results obtained.
5.2 Identification of OOS: Reports of Full-Scale Investigation
When an initial analysis does not confirm the errors caused by OOS result from lab investigations, full scale investigations with proper design should be performed
The following are the important aspects of OOS results identification with respect to full scale investigation.
1. Review of manufacturing, production and sampling.
2. Review of lab investigation result.
3. Supplementary laboratory testing procedure.
5.3 Analysis of Investigated Results
6. CHANGE CONTROL
6.1 Definition
Change control can be defined as; “A formal system by which qualified representatives of appropriate disciplines review proposed or actual changes that might affect the validated status of facilities, systems, equipment or processes. The intent is to determine the need for action that would ensure and document that the system is maintained in a validated state”.
6.2 functions
- Identification of the changes made.
- Review of the change.
- Approval of the change.
- Validating the changes which can alter the product quality, regulatory or GMP (Good manufacturing process) requirements.
- Analysis of the change and monitoring of the impact of change
6.3 Area of Change
- Manufacture
- Quality control and quality assurance
- Research and development
- Engineering
- Marketing.
6.4 Written Procedures and Documentation
Procedures kept at the proper place to describe the changes made. Standard operating procedure (SOP) and records of change control documents are required for the documentation.
The Change Control Form (CCF) is documentation part of change control.
7. ISO QUALITY STANDARDS
 |
| Relationship among QMS, QA, GMP and QC |
- For customer satisfaction and safety, which depend on output of the organization.
- For maintaining the quality system that is auditable and verifiable with continuous mode.
- For the continuous improvement and effectiveness of the organization with main focus on customer.
7.1 ISO standard is concerned with the
- Standard development based on global expert opinion.
- Capacity building activities by technical assistance.
- Research and training for the education about standards
7.2 ISO 9000 Series
ISO 9000: Quality assurance and quality management concepts, guidelines for selection
ISO 9001: QA in design, production and development of the system, service and installation.
ISO 9002: QA in production, service and installation.
ISO 9003: Model for QA in final inspection and finished good testing.
ISO 9004: Guidelines for QA and quality management planning, implementation, efficiency and improvement.
7.3 Requirements of ISO 9000 Series
- Responsibility of the Management of the Organization
- Quality System and Design Control
- Documentation regarding Stakeholder’s Contract and Purchasing
- Process Control
- Final Inspection and Testing of Finished Goods
- Actions taken to Overcome the Errors
- Internal Audits
- Training and Providing Education/Awareness regarding the Standards
- Statistical Analysis
7.4 Advantages of ISO Certification
1. Increment in marketability.
2. International recognitions.
3. Reliability in the market.
4. Capability of providing quality products to satisfy the customer.
5. Improvement in relationship with customers and stakeholders
8. ISO 14000
ISO 14000 family provides practical tools to manage the environmental responsibilities of
companies and organizations. It was initially published in 1996 and revised in 2004
 |
| Principle of ISO 14000 |
8.1 Features of ISO 14000
1. EMS (Environmental Management System).
2. Environmental related evaluations, investigations and auditing.
3. The investigation of the process performances.
4. Environmental labels and declarations
8.2 Advantages of ISO 14000
• Better marketability.
• Better utilization of resources.
• Environmental responsibilities.
• Better quality of finished goods and products.
• Customers’ satisfaction.
• Enhancement of the reputation and reliability of the organization.
• Improvement of the relationship among management, employees, customers and investors.
• Reduction in cost.
9. NABL
“National Accreditation Board for Testing and Calibration Laboratories”.
constituted for providing accreditation to the Government, industry associations and individual industry or organizations.
9.1 NABL and ISO Principles
- Accreditation Systems: ISO/IEC 17011 (2017)
- Testing and Calibration Laboratories: ISO/IEC 17025 (2005) and ISO/IEC 17025 (2017)
- Medical Laboratories: ISO 15189 (2012
- PTP (Proficiency Testing Providers): SO/IEC 17043 (2010)
- RMP (Reference Material Producers): ISO 17034 (2016
NABL maintains the relationship with several international bodies like:
1. International Laboratory Accreditation Co-operation (ILAC).
2. Asia Pacific Accreditation Co-operation (APAC).
9.2 Advantages of NABL
1. Increases credibility of the testing reports (issued by the specific lab).
2. Building up of confidence for the organization in calibrating and testing the reports.
3. Accreditation ensures the quality assurance systems of the organization.
4. Customers’ satisfaction.
5. Customers of these accredited organizations/ laboratories can have greater access
for their products, in both domestic and international markets.
6. Market acceptability and increased potential in business.
7. Elimination of need of re-testing.
8. Monitoring of maintenance of efficacy for long time.
9. Improvement in the process.
10. Employee’s/Staff’s education and training can be overlooked.
11. Increases market opportunity for RMPs
10. GLP
Out of specification (OOS): The test results that fall outside the acceptance criteria established
in SOP. (Against Specification limit).
Out of specification (OOS): The test results that fall outside the acceptance criteria established
in SOP. (Against Specification limit).
Out of specification (OOS): The test results that fall outside the acceptance criteria established
in SOP. (Against Specification limit).
Out of specification (OOS): The test results that fall outside the acceptance criteria established
in SOP. (Against Specification limit).
Good Laboratory Practice is a quality system concerned with the organizational process and the conditions under which a study is planned, performed, monitored, recorded, archived and reported
10.1 Why GLP?
- Development of quality test data
- Mutual acceptance of data
- Avoid duplication of data
- Avoid technical barriers to trade
- Protection of human health and the environment
10.2 Scope
Non-clinical safety testing of test items contained in
- Pharmaceutical products
- Pesticide products
- Cosmetic products
- Veterinary drugs
- Food and feed additives
- Industrial chemicals
10.3 The GLP Principles
1.Test facility organization and personnel
2.Quality Assurance (QA) program
3.Facilities
4.Apparatus materials and reagents
5.Test systems
6.Test and reference items
7.Standard Operating Procedures (SOP’s)
8.Performance of the study
9.Reporting of study results
10.Storage and retention of records and materials
The organizations should fulfill all the criteria to provide all the facilities for the good
practice in laboratory. The personnel should have enough knowledge about the principles
and working of the practices. In the elements of GLP, SOP is an important part with respect
to quality assurance. To maintain the productivity of the result, a well documented SOP is
required; moreover, the personnel should have complete information mentioned in SOPs.
SOPs define the complete process flow and work steps which help to achieve the accurate
and precised results. Validated modern equipments and adequate facilities should be
provided by the organization to maintain the good practice in laboratory. The complete
specifications and storage of reagents and materials should be provided. QA laboratory
should have the proper test procedures (physical, chemical and biological) and characterized
data for both the test and reference materials. Quality assurance unit (QAU) bears the
responsibility to assure the GLP and this unit is attached with QAL and QAP
10.4 Aim of GLP
1. GLP helps to reduce the number of false negatives arising from the studies. False negative result for a toxicity study falsely intimated that the test item is not toxic, but in real the item is toxic.
2. GLP also helps to reduce the chance of false positives. In the case of a non-clinical safety study, the results wrongly predict that the test item is toxic, when really it is not.
3. GLP promotes international recognition of study data. When studies are performed according to OECD GLP principles, then the acceptability and reliability of the data are recognized in the international level by the OECD member states.
NEXT TOPIC (CLICK HERE)