SOP for Drain Sanitization (Department : Personnel & Administration)

 

OBJECTIVE              :      

1.1       To lay down the procedure for drain sanitization.

 

2.0.      SCOPE                        :                                      

2.1       This procedure is applicable for drainage points located at Manufacturing facility of Company.

 

3.0.      RESPONSIBILITY    : 

3.1.      House keeping personnel is responsible for sanitization of drain.

3.2       Officer  P & A is responsible for verification of cleaning status drain.

 

4.0.      ACCOUNTABILITY :

4.1              Head of the P & A  department         

                                                 

5.0.      PROCEDURE                        :

5.1       Prepare the sanitization solution .i.e. 2.5 % Dettol or 2.5 % Savlon in qty required for sanitization of drain.

5.2       Clean the drain with 0.1 % Teepol solution using nylon brush.

5.3       Remove all the stains present applying cleaning agent in required quantity.

5.4       Apply sufficient Quantity of sanitization agent i.e. 2.5 % Dettol or 2.5 % Savlon to each drain.

5.5       Finally fill the drainage points with sanitizing agent such that the some amount of sanitization agent remains there in contact with drain for longer time.

5.6       Record the sanitization activity in Drain sanitization record.(Annexure-I).

5.7       Frequency: Daily or during product change over.

5.8       2.5 % Dettol & Savlon shall be used on alternate day for sanitization.